ATG-300 Series Power Signal Generator

Single channel

It can output sine wave, square wave, triangle wave, and pulse wave

Built-in/external signal input

Output amplitude: 0-90Vp-p (±45Vp)

Maximum output current: 18Ap

Bandwidth（-3dB） DC~30kHz

ATG-309 is an ideal power signal generator that can output sine wave, square wave, triangle wave and pulse wave. Maximum output voltage 90Vp-p (±45V), output peak current 18Ap. Maximum output power 810Wp, The input signal can be built-in signal source and external siganl source to realize perfect signal amplification.

Input

The input end of external signal is BNC interface. During the signal built-in input, it is the mode of power signal generator, just set the parameters such as waveform, frequency and voltage; when the signal is accessed externally, it is the amplifier mode, the input resistance is 5kΩ, the output resistance can be switched, and the signal can be amplified by regulating the voltage gain.

Output

The output interface is banana binding post; output voltage is 0-90Vp-p(±45Vp); maximum output current is 18Ap.

LCD Displays

LCD operation panel to display the equipment state and parameters dynamically, the interactive interface is clear at a glance, concise and easy to understand.

Voltage gain

Amplifier mode for external input signal, voltage gain is 0-30 times (1step) digital-control and variable. Gain displayed on LCD, be adjusted to the required voltage quickly.

Monitor

1/100 Monitor: The port voltage is 1/100 of output port, the monitoring port is BNC connector that can be connected with the oscilloscope for monitoring the output voltage in real time.