Application of the ATA-309C Power Amplifier in Acoustic Wave Sensing Experiments
Experiment Name: Acoustic Wave Sensing Experiment
Experiment Content:
Measure the voltage signals output by acoustic sensors and calculate their characteristics such as sensitivity and frequency response.
Research Direction: Acoustic Sensing Technology
Test Equipment:
ATA-309 power amplifier, signal generator, acoustic sensor, photodetector, speaker, laser, computer, etc.

Figure 1: Schematic Diagram of the Experimental Setup
Experimental Procedure:
The experiment simulates an acoustic field in air to test the performance of acoustic sensors. The signal generator is connected to the power amplifier, which is then linked to the speaker. The signal generator outputs a single-frequency sinusoidal signal, and the power amplifier controls the amplitude of the sinusoidal voltage. The speaker converts the electrical signal into an acoustic wave signal, which is received by the acoustic sensor under test.
Experimental Results:

Figure 2: Experimental Results
During the experiment, the signal generator outputs a 1 kHz acoustic wave signal. The power amplifier controls the voltage across the speaker, maintaining the output sound pressure within the range of 0–20 mPa. Three sets of acoustic sensors with different performance characteristics are tested, and the output voltages of the sensors are recorded. Under a 1 kHz acoustic field with sound pressures of 0–20 mPa, the output voltages of the three sensors exhibit sinusoidal waveforms, with amplitudes increasing as the sound pressure rises. Among them, the sensor with the highest sensitivity produces a peak-to-peak output voltage of 10 mV at 20 mPa sound pressure (indicated by the red curve in the figure).
Power Amplifier Recommendation: ATA-309C Power Amplifier

Figure: ATA-309C Power Amplifier Specifications
This document is compiled and published by Aigtek. For more case studies and detailed product information, please continue to follow us. Xi'an Aigtek has become a large-scale instrument and equipment supplier in the industry with an extensive product line, and all demo units are available for free trial.
Hot News
-
Application of Power Amplifiers in Experiments on the Directional Emission Performance of Underwater Acoustic Devices
-
Application of Broadband Power Amplifiers in the Demodulation Experiments of Tunable Lasers
-
Application of Power Amplifiers in Capacitively Coupled Wireless Power Transfer Systems
-
Power Amplifier Drives Signal Transceiver Testing for Novel Long-Wave Communication Antenna
-
Application of ATA-4051 High-Voltage Power Amplifier in the Design of Bionic Underwater Acoustic Receivers
-
Application of Broadband Amplifiers in Ultrasound Reflection Imaging Studies of CMUT Arrays





















